If you are looking to purchase a scroll saw for woodworking, you might be wondering how does Ridgid make a scroll saw. You can find a great saw at a great price online. A scroll saw is a machine that cuts long, circular curves. They are also called “crescent saws”. These are used to cut wood, plastic and metal as well as paper. There are many scroll saws out there for much less than $ 1000 and more than $ 1000.
The primary compromise of price versus features is probably one you will never think about. This is why it is always recommended that when you’re starting out researching the marketplace for any product, always consider your top must have features. These must have features are the ones that will make your woodworking project go smoothly. This is especially true with a scroll saw.
One of the most common uses for a scroll saw is to cut stock along a curve. This is accomplished by raising the cutting edge and sliding the blade along the contours of the stock. Many saws will also allow you to manually angle the blade in certain directions as well. These types of cuts are commonly referred to as “curved cuts” or “smooth cuts”.
Another common use is for planer cutters. These pieces are simply crosscut with a scroll saw blade. This is not to say you can’t use other cutting tools with these planers. There are various different planer cuts and they will cut different pieces of wood. Some examples are: long shank, short shank, rabbet, pocket, and sloping shoulders.
Many scroll saw models come standard with bevel angles, but if you would like to customize this option you may have to have your supplier modify the saw’s cutting angle selection menu. Most suppliers alter the bevel angle on existing stock to better suit their particular applications. For example, if your saw is primarily used for crosscut applications, you’ll likely want to set the bevel angle to 90 degrees. However, if your application requires more detail with the cut, you’ll probably want to increase this angle.
A final option to consider is how fast the scroll blades move. Some scroll saws have two speed selections, a slow “locked” speed and a faster “flight” speed. The slow “locked” speed is typically reserved for fine work, such as nailing rabbets, and the faster “flight” speeds are ideal for cutting thick stock through multiple passes with little waste. Many scroll saws also feature options that enable you to manually adjust both the height of the cutting blade and the tooth pitch of the blade, which can have a profound effect on cutting efficiency and depth of cut.
Some scroll saws feature a removable blade guard, which allows the user to remove the guard and obtain access to the blade’s tensioning mechanism. This mechanism typically features two pulleys, one for tension and the other for blade slip. Adjustable tension is an important factor when choosing a new scroll saw; the amount of tension that can be applied to the blade is determined by the diameter of the blade and the tooth pitch of the blade. To increase the tension of the blade, the user must loosen the tension adjustment screw located on the back of the blade. If one of the pulleys slips past a critical point, the machine will stop and you must restart the blade assembly.
When shopping for a new scroll saw, it is wise to pay attention to the different blade tensions available. The two most common styles are veneer and forged blades, and each have their own benefits and drawbacks. A well-constructed scroll saw with a good balance between blade type and cutting performance will last longer and perform better than one with an inferior quality blade and poor balance. For best results, a scroll saw with both a veneer blade and a forged blade should be purchased. Although they are heavier and more expensive, the extra cost will pay off in the long run with lower repair and maintenance costs.